Our machines
(Kopie 2)
Injection Moulding Machines [29]
| # 301 | Battenfeld, Type: BA 6500/2800 HM | More details |
| Clamping force t: 650, Year: 1997, Injection volume cm³: 2128 |
| # 302 | Demag, Type: Ergotech 450-1450 System | More details |
| Year: 2003, Clamping force t: 450, Injection volume cm³: 763 |
| # 303 | Demag, Type: Ergotech 450-1450 System, 2 | More details |
| Year: 2003, Clamping force t: 450, Injection volume cm³: 763 |
| # 304 | Demag, Type: Ergotech 450-1450 System, 3 | More details |
| Year: 2003, Clamping force t: 450, Injection volume cm³: 763 |
| # 305 | Demag, Type: Ergotech 650-5200 System | More details |
| Year: 2001, Clamping force t: 650, Injection volume cm³: 2835 |
| # 306 | Demag, Type: Ergotech 650-5200 System, 2 | More details |
| Year: 2001, Clamping force t: 650, Injection volume cm³: 2835 |
| # 307 | Demag, Type: Ergotech 650-5200 System, 3 | More details |
| Year: 2001, Clamping force t: 650, Injection volume cm³: 2835 |
| # 308 | Engel, Type: ES 2000/650 | More details |
| Year: 1991, Clamping force t: 650, Injection volume cm³: 1154 |
| # 309 | Engel, Type: Duo 7050/1300 | More details |
| Year: 2009, Clamping force t: 1300, Injection volume cm³: 4160 |
| # 310 | Krauss Maffei, Type: KM 280-1400 C3 Akku | More details |
| Year: 2000, Clamping force t: 280, Injection volume cm³: 678 |
| # 311 | Krauss Maffei, Type: KM 500-1900-1000 CZ, 2 K with Sepro robot | More details |
| Year: 1998, Clamping force t: 500, Injection volume cm³: 1047/523 |
| # 312 | Krauss Maffei, Type: KM 450-3500 C3 , Accu | More details |
| Year: 1999, Clamping force t: 450, Injection volume cm³: 1754 |
| # 313 | Krauss Maffei, Type: KM 180-1000 C3, Akku | More details |
| Year: 1999, Clamping force t: 180, Injection volume cm³: 523 |
| # 314 | Krauss Maffei, Type: KM 500/5700 BM | More details |
| Year: 1996, Clamping force t: 500, Injection volume cm³: 2956 |
| # 315 | Krauss Maffei, Type: KM 500-2700 C1, with Sepro Robot | More details |
| Year: 1998, Clamping force t: 500, Injection volume cm³: 1433 |
| # 316 | Krauss Maffei, Type: KM 1000-6100 IMC | More details |
| Year: 2001, Clamping force t: 1000, Injection volume cm³: 3021 |
| # 317 | Krauss Maffei, Type: KM 1300-8000 MC-1, with Kuka robot | More details |
| Year: 2003, Clamping force t: 1300, Injection volume cm³: 4546 |
| # 318 | Krauss Maffei, Type: KM 650/5700 CM with Kuka Robot | More details |
| Year: 2002, Clamping force t: 650, Injection volume cm³: |
| # 319 | Krauss Maffei, Type: KM 200-1400 C2 | More details |
| Year: 2001, Clamping force t: 200, Injection volume cm³: 570 |
| # 320 | Krauss Maffei, Type: KM 1300-8000 MC-2, with Kuka robot | More details |
| Year: 2003, Clamping force t: 1300, Injection volume cm³: 5453 |
| # 321 | Krauss Maffei, Type: KM 1300-12000 MX | More details |
| Year: 2008, Clamping force t: 13000, Injection volume cm³: 5195 |
| # 322 | Krauss Maffei, Type: KM 200-1400 C2 | More details |
| Year: 2001, Injection volume cm³: 679, Clamping force t: 200 |
| # 323 | Netstal, Type: Synergy S3000-1700/900 2 Component | More details |
| Year: 2000, Clamping force t: 300, Injection volume cm³: 954/393 |
| # 324 | Netstal, Type: Synergy 420 E-3700 | More details |
| Year: 2000, Clamping force t: 420, Injection volume cm³: 2035 |
| # 325 | Netstal, Type: HP 3000/1650 | More details |
| Clamping force t: 300, Year: 1995, Injection volume cm³: 954 |
| # 326 | Netstal, Type: HP 3000/1650 | More details |
| Clamping force t: 300, Year: 1996, Injection volume cm³: 954 |
| # 327 | Netstal, Type: Synergy S3000-1700/900 2 Component, 30.000 Runhour | More details |
| Year: 2001, Clamping force t: 300, Injection volume cm³: 954/393 |
| # 328 | Stork, Type: SX 5500-8600 | More details |
| Year: 1998, Clamping force t: 550, Injection volume cm³: 3885 |
| # 329 | Vecoplan, Type: VAZ 160/200 SLF | More details |
| Total weight Kg: 19.000, Year: 2004 |
Blow moulding machines [4]
| # 330 | Battenfeld, Type: Fischerkopf Kopf | More details |
| # 331 | Fischer-W.Müller, Type: Müllerkopf S3 - 55/120 | More details |
| # 332 | Fischer-W.Müller, Type: FMB 4/12-100 , 3 layer Coex Blow machine Complete Line | More details |
| Year: 1998, Screw size mm: 50/90/50 |
| # 333 | Magic, Type: MG 5D | More details |
| Year: 1991 |
Thermoforming Machines [0]
Extrusion Machines [1]
| # 334 | Müller, Type: ELK 60-28, Profil Extruder | More details |
| Year: 1995, Screw size mm: 60 |
Metal Processing Machines [0]
Auxiliary equipment [3]
| # 335 | Engel, Type: ERC 53/1 - CL, Roboter | More details |
| Year: 1999 |
| # 336 | Thimonnier, Type: Z 83 BS 100, Hochfrequenz-Kunststoff-Schweißpresse | More details |
| Year: 2001 |
| # 337 | Wittmann, Type: W620M -636, Robot System | More details |
Offset [0]
| Number of machines: 37 | Export list as pdf file |
| Battenfeld | Injection Moulding Machine | |
| Type: BA 6500/2800 HM | Control: Unilog 9000 C | Year: 1997 |
Clamping unit
Clamping force t: | 650 | Opening stroke mm: | 800-1400 |
|---|---|---|---|
Distance between tie bars mm: | 1000 x 1000 | Installation height min/max mm: | 500/1100 |
Mould fixing platen size h x v: | 1400 x 1550 |
Injection unit
Screw size mm: | 85 | Injection shot weight in Polysterol gr: | 1936 |
|---|---|---|---|
Injection volume cm³: | 2128 | Injection pressure increased bar: | 1354 |
Size and weight
Dimension HxWxD m: | 9.7 x 2.4 x 2.4 | Total weight Kg: | 30.000/8.000 |
|---|
Additional information
2 Fach Kernzug
Euromap 12
Bi Metalzylinder
| Demag | Injection Moulding Machine | |
| Type: Ergotech 450-1450 System | Control: NC4 | Year: 2003 |
Clamping unit
Clamping force t: | 450 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 2020 | Installation height min/max mm: | 490-1090 |
Injection unit
Screw size mm: | 60 | Injection shot weight in Polysterol gr: | 690 |
|---|---|---|---|
Injection volume cm³: | 763 | Injection pressure increased bar: | 1905 |
Size and weight
Dimension HxWxD m: | 9 x 2.5 x 2.4 | Total weight Kg: | 39.500 |
|---|
Additional information
Süling Robot System,
Kernzüge 4,
Kaskade 15
Wkzg. Heizung 24 Zonen
Magnetspannplatte
| Demag | Injection Moulding Machine | |
| Type: Ergotech 450-1450 System, 2 | Control: NC4 | Year: 2003 |
Clamping unit
Clamping force t: | 450 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 2020 | Installation height min/max mm: | 490-1090 |
Injection unit
Screw size mm: | 60 | Injection shot weight in Polysterol gr: | 690 |
|---|---|---|---|
Injection volume cm³: | 763 | Injection pressure increased bar: | 1905 |
Size and weight
Dimension HxWxD m: | 9 x 2.5 x 2.4 | Total weight Kg: | 39.500 |
|---|
Additional information
Süling Robot System,
Kernzüge 4,
Kaskade 15
Wkzg. Heizung 24 Zonen
Magnetspannplatte
| Demag | Injection Moulding Machine | |
| Type: Ergotech 450-1450 System, 3 | Control: NC4 | Year: 2003 |
Clamping unit
Clamping force t: | 450 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 2020 | Installation height min/max mm: | 490-1090 |
Injection unit
Screw size mm: | 60 | Injection shot weight in Polysterol gr: | 690 |
|---|---|---|---|
Injection volume cm³: | 763 | Injection pressure increased bar: | 1905 |
Size and weight
Dimension HxWxD m: | 9 x 2.5 x 2.4 | Total weight Kg: | 39.500 |
|---|
Additional information
Süling Robot System,
Kernzüge 4,
Kaskade 15
Wkzg. Heizung 24 Zonen
Magnetspannplatte
| Demag | Injection Moulding Machine | |
| Type: Ergotech 650-5200 System | Control: NC 4 | Year: 2001 |
Clamping unit
Clamping force t: | 650 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 1000 x 900 | Installation height min/max mm: | 450/950 |
Mould fixing platen size h x v: | 1450 x 1350 |
Injection unit
Screw size mm: | 95 | Injection shot weight in Polysterol gr: | 2550 |
|---|---|---|---|
Injection volume cm³: | 2835 | Injection pressure increased bar: | 1832 |
Size and weight
Dimension HxWxD m: | 10 x 2.48 x 2.48 | Total weight Kg: | 33000 |
|---|
Additional information
Ilsemann Robotsystem
4 Kernzüge
Kaskade 8
Heizung 24 Zonen
| Demag | Injection Moulding Machine | |
| Type: Ergotech 650-5200 System, 2 | Control: NC 4 | Year: 2001 |
Clamping unit
Clamping force t: | 650 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 1000 x 900 | Installation height min/max mm: | 450/950 |
Mould fixing platen size h x v: | 1450 x 1350 |
Injection unit
Screw size mm: | 95 | Injection shot weight in Polysterol gr: | 2550 |
|---|---|---|---|
Injection volume cm³: | 2835 | Injection pressure increased bar: | 1832 |
Size and weight
Dimension HxWxD m: | 10 x 2.48 x 2.48 | Total weight Kg: | 33000 |
|---|
Additional information
Ilsemann Robotsystem
4 Kernzüge
Kaskade 8
Heizung 24 Zonen
| Demag | Injection Moulding Machine | |
| Type: Ergotech 650-5200 System, 3 | Control: NC 4 | Year: 2001 |
Clamping unit
Clamping force t: | 650 | Opening stroke mm: | 930 |
|---|---|---|---|
Distance between tie bars mm: | 1000 x 900 | Installation height min/max mm: | 450/950 |
Mould fixing platen size h x v: | 1450 x 1350 |
Injection unit
Screw size mm: | 95 | Injection shot weight in Polysterol gr: | 2550 |
|---|---|---|---|
Injection volume cm³: | 2835 | Injection pressure increased bar: | 1832 |
Size and weight
Dimension HxWxD m: | 10 x 2.48 x 2.48 | Total weight Kg: | 33000 |
|---|
Additional information
Ilsemann Robotsystem
4 Kernzüge
Kaskade 8
Heizung 24 Zonen
| Engel | Injection Moulding Machine | |
| Type: ES 2000/650 | Control: EC88 | Year: 1991 |
Clamping unit
Clamping force t: | 650 | Opening stroke mm: | 900 |
|---|---|---|---|
Distance between tie bars mm: | 1025 x 925 | Installation height min/max mm: | 600 x 1120 |
Mould fixing platen size h x v: | 1500 x 1390 |
Injection unit
Screw size mm: | 70 | Injection shot weight in Polysterol gr: | 1050 |
|---|---|---|---|
Injection volume cm³: | 1154 | Injection pressure increased bar: | 1440 |
Size and weight
Dimension HxWxD m: | 9.8 x 2.7 x 2.3 | Total weight Kg: | 30.000/10.000 |
|---|
Additional information
Suhling SMB 621 CM Robot System, model 1998.
Kaskade systems
4 core puller
| Engel | Injection Moulding Machine | |
| Type: Duo 7050/1300 | Control: CC 200 | Year: 2009 |
Clamping unit
Clamping force t: | 1300 | Opening stroke mm: | 2350 |
|---|---|---|---|
Distance between tie bars mm: | 1530 x 1275 | Installation height min/max mm: | 700-1600 |
Mould fixing platen size h x v: | 2200x1990 |
Injection unit
Screw size mm: | 105 | Injection shot weight in Polysterol gr: | 3200 |
|---|---|---|---|
Injection volume cm³: | 4160 | Injection pressure increased bar: | 1650 |
Additional information
ERC 63 Engel Robot
Core pullers 5/5
Cooling curcuit 30/30
Hotrunner 40
Kaskade 14
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 280-1400 C3 Akku | Control: MC4 | Year: 2000 |
Clamping unit
Clamping force t: | 280 | Opening stroke mm: | 820 |
|---|---|---|---|
Distance between tie bars mm: | 630 x 630 | Installation height min/max mm: | 330 |
Mould fixing platen size h x v: | 995 x 1050 |
Injection unit
Screw size mm: | 60 | Injection shot weight in Polysterol gr: | 617 |
|---|---|---|---|
Injection volume cm³: | 678 | Injection pressure increased bar: | 2007 |
Size and weight
Dimension HxWxD m: | 6.1 x 2.2 x 2.3 | Total weight Kg: | 14.200 |
|---|
Additional information
1 Kernzug Euromap12, Akku
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 500-1900-1000 CZ, 2 K with Sepro robot | Control: MC3F | Year: 1998 |
Clamping unit
Clamping force t: | 500 | Opening stroke mm: | 1650 |
|---|---|---|---|
Distance between tie bars mm: | 900 x 800 | Installation height min/max mm: | 480 |
Mould fixing platen size h x v: | 1270 x 1200 |
Injection unit
Screw size mm: | 55/70 | Injection shot weight in Polysterol gr: | 953/476 |
|---|---|---|---|
Injection volume cm³: | 1047/523 | Injection pressure increased bar: | 1778/1904 |
Size and weight
Dimension HxWxD m: | 8.3 x 2.95 x 2.35 | Total weight Kg: | 27.000 |
|---|
Additional information
Sperr Robot
Accu
Drehteller
Kernzug
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 450-3500 C3 , Accu | Control: MC4 | Year: 1999 |
Clamping unit
Clamping force t: | 450 | Opening stroke mm: | 1170 |
|---|---|---|---|
Distance between tie bars mm: | 900 x 800 | Installation height min/max mm: | 480 |
Mould fixing platen size h x v: | 1270 x 1230 |
Injection unit
Screw size mm: | 80 | Injection shot weight in Polysterol gr: | 1544 |
|---|---|---|---|
Injection volume cm³: | 1754 | Injection pressure increased bar: | 2205 |
Size and weight
Dimension HxWxD m: | 7.98 x 2.35 x 2.55 | Total weight Kg: | 26.000 |
|---|
Additional information
C3 Systems
Euromap 12 Interface
Accu
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 180-1000 C3, Akku | Control: MC 4 | Year: 1999 |
Clamping unit
Clamping force t: | 180 | Opening stroke mm: | 700 |
|---|---|---|---|
Distance between tie bars mm: | 560 x 560 | Installation height min/max mm: | 600 |
Mould fixing platen size h x v: | 915 x 915 |
Injection unit
Screw size mm: | 55 | Injection shot weight in Polysterol gr: | 476 |
|---|---|---|---|
Injection volume cm³: | 523 | Injection pressure increased bar: | 1904 |
Size and weight
Dimension HxWxD m: | 5.6 x 1.9 x 2.2 | Total weight Kg: | 9.700 |
|---|
Additional information
new Pump 2013
Euromap12
Akku
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 500/5700 BM | Control: MC3 F | Year: 1996 |
Clamping unit
Clamping force t: | 500 | Opening stroke mm: | 1650 |
|---|---|---|---|
Distance between tie bars mm: | 900 x 800 | Installation height min/max mm: | 480 |
Mould fixing platen size h x v: | 1340 x 1200 |
Injection unit
Screw size mm: | 95 | Injection shot weight in Polysterol gr: | 2660 |
|---|---|---|---|
Injection volume cm³: | 2956 | Injection pressure increased bar: | 1931 |
Size and weight
Dimension HxWxD m: | 12.45 x 2.97 x 2.39 | Total weight Kg: | 27.000/10.000 |
|---|
Additional information
ONI Frequenzumformer
2 Kernzüge
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 500-2700 C1, with Sepro Robot | Control: MC4 | Year: 1998 |
Clamping unit
Clamping force t: | 500 | Opening stroke mm: | 1260 |
|---|---|---|---|
Distance between tie bars mm: | 900 x 800 | Installation height min/max mm: | 90 |
Mould fixing platen size h x v: | 1270 x 1200 |
Injection unit
Screw size mm: | 80 | Injection shot weight in Polysterol gr: | 1304 |
|---|---|---|---|
Injection volume cm³: | 1433 | Injection pressure increased bar: | 1829 |
Size and weight
Dimension HxWxD m: | 7.4 x 2.33 x 2.5 | Total weight Kg: | 17.000 |
|---|
Additional information
The coupling Engine – Pumpdrive is new
Euromap 12
Seprorobot 3041 BZ S900-II
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 1000-6100 IMC | Control: MC 4 | Year: 2001 |
Clamping unit
Clamping force t: | 1000 | Opening stroke mm: | 1400 |
|---|---|---|---|
Distance between tie bars mm: | 1400 x 1120 | Installation height min/max mm: | 700-1200 |
Mould fixing platen size h x v: | 2000 x 1770 |
Injection unit
Screw size mm: | 105 | Injection shot weight in Polysterol gr: | 1964 |
|---|---|---|---|
Injection volume cm³: | 3021 | Injection pressure increased bar: | 2000 |
Additional information
KR 125 ROBOT System
1 Core pullers
8 x Hotrunner
24 x Cooling curcuit
Needle valve
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 1300-8000 MC-1, with Kuka robot | Control: MC4 | Year: 2003 |
Clamping unit
Clamping force t: | 1300 | Opening stroke mm: | 2250 |
|---|---|---|---|
Distance between tie bars mm: | 1500x1250 | Installation height min/max mm: | 800/1400 |
Mould fixing platen size h x v: | 2140x1960 |
Injection unit
Screw size mm: | 105 | Injection shot weight in Polysterol gr: | 4137 |
|---|---|---|---|
Injection volume cm³: | 4546 | Injection pressure increased bar: | 1778 |
Size and weight
Total weight Kg: | 60.000/37.000 |
|---|
Additional information
Kuka Roboter
Conyvor Band
Kaskaden: 16
Kernzüge: 7 (feste Seite), 6 (bewegliche Seite) und jeweils ein pneumatischer pro Seite
Heißkanalwege: 64
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 650/5700 CM with Kuka Robot | Control: MC 4 | Year: 2002 |
Clamping unit
Clamping force t: | 650 |
|---|
Injection unit
Screw size mm: | 80 |
|---|
Additional information
Kuka KR 60-3 KS Robot
3 Kernzüge
32 HK Regelstelle
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 200-1400 C2 | Control: MC4 | Year: 2001 |
Clamping unit
Clamping force t: | 200 | Opening stroke mm: | 700 |
|---|---|---|---|
Distance between tie bars mm: | 560 x 560 | Installation height min/max mm: | 350 |
Mould fixing platen size h x v: | 915 x 915 |
Injection unit
Screw size mm: | 55 | Injection shot weight in Polysterol gr: | 519 |
|---|---|---|---|
Injection volume cm³: | 570 | Injection pressure increased bar: | 2380 |
Size and weight
Dimension HxWxD m: | 5,70 x 1,90 x 2,30 | Total weight Kg: | 10000 |
|---|
Additional information
8-Zonen interner Heißkanalregler 5 Zonen Temperaturfühler
2 Kernzüge hydraulisch
4 Innendruckaufnehmer
Stunden
MC4 Steuerung
2 Luftventile
1 pneumatischer Nadelverschluss
1 elektr. Schnittstelle für Ausfallrutsche
1 potentialreier Kontakt Han 3A (für Dosiergerät) Euromap 12 Schnittstelle (Handling)
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 1300-8000 MC-2, with Kuka robot | Control: MC4 | Year: 2003 |
Clamping unit
Clamping force t: | 1300 | Opening stroke mm: | 2250 |
|---|---|---|---|
Distance between tie bars mm: | 1500x1250 | Installation height min/max mm: | 800/1400 |
Mould fixing platen size h x v: | 2140x1960 |
Injection unit
Screw size mm: | 115 | Injection shot weight in Polysterol gr: | 4962 |
|---|---|---|---|
Injection volume cm³: | 5453 | Injection pressure increased bar: | 1482 |
Size and weight
Dimension HxWxD m: | 12.16 x 3.49 x 2.58 | Total weight Kg: | 60.000/37.000 |
|---|
Additional information
Kuka Roboter
Conyvor Band
Kaskaden: 16
Kernzüge: 7 (feste Seite), 6 (bewegliche Seite) und jeweils ein pneumatischer pro Seite
Heißkanalwege: 64
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 1300-12000 MX | Control: MC5 | Year: 2008 |
Clamping unit
Clamping force t: | 13000 | Opening stroke mm: | 3050 |
|---|---|---|---|
Distance between tie bars mm: | 1851 x 1400 | Installation height min/max mm: | 700-1800 |
Mould fixing platen size h x v: | 2140 x 1960 |
Injection unit
Screw size mm: | 105 | Injection shot weight in Polysterol gr: | 3200 |
|---|---|---|---|
Injection volume cm³: | 5195 | Injection pressure increased bar: | 2296 |
Additional information
KR 150 Robot
Core pullers 5/5
Cooling curcuit 30/30
Hot runner 36
14 Kaskade
| Krauss Maffei | Injection Moulding Machine | |
| Type: KM 200-1400 C2 | Control: MC4 | Year: 2001 |
Clamping unit
Clamping force t: | 200 | Opening stroke mm: | 700 |
|---|---|---|---|
Distance between tie bars mm: | 560x560 | Installation height min/max mm: | 350/700 |
Mould fixing platen size h x v: | 915x915 |
Injection unit
Screw size mm: | 60 | Injection shot weight in Polysterol gr: | 619 |
|---|---|---|---|
Injection volume cm³: | 679 | Injection pressure increased bar: | 2380 |
Size and weight
Dimension HxWxD m: | 5.70 x 1.90 x 2.3 | Total weight Kg: | 10.500 |
|---|
Additional information
8-Zonen interner Heißkanalregler 6 Zonen Temperaturfühler
2 Kernzüge hydraulisch
2 Innendruckaufnehmer
Stunden
MC4 Steuerung
2 Luftventile
1 pneumatischer Nadelverschluss
1 elektr. Schnittstelle für Ausfallrutsche
1 potentialreier Kontakt Han 3A (für Dosiergerät) Euromap 12 Schnittstelle (Handling
| Netstal | Injection Moulding Machine | |
| Type: Synergy S3000-1700/900 2 Component | Control: - | Year: 2000 |
Clamping unit
Clamping force t: | 300 | Opening stroke mm: | 0-700 |
|---|---|---|---|
Distance between tie bars mm: | 720 x 720 | Installation height min/max mm: | 400-750 |
Mould fixing platen size h x v: | 1127 x 1060 |
Injection unit
Screw size mm: | 70/50 | Injection shot weight in Polysterol gr: | 916/377 |
|---|---|---|---|
Injection volume cm³: | 954/393 | Injection pressure increased bar: | 1801/1840 |
Size and weight
Dimension HxWxD m: | 8.8 x 2.3 x 2.3 | Total weight Kg: | 23.300/1.500 |
|---|
Additional information
Neureder Roboter
Drehtisch mit Servomotor
Magnetplatte auf der Düsenseite
Kaskadesteuerung
2 Kernzüge
Robot schnittstelle
Gasinjection System
| Netstal | Injection Moulding Machine | |
| Type: Synergy 420 E-3700 | Control: - | Year: 2000 |
Clamping unit
Clamping force t: | 420 | Opening stroke mm: | 0-700 |
|---|---|---|---|
Distance between tie bars mm: | 713 x 713 | Installation height min/max mm: | 600/950 |
Mould fixing platen size h x v: | 1127 x 1060 |
Injection unit
Screw size mm: | 90 | Injection shot weight in Polysterol gr: | 1955 |
|---|---|---|---|
Injection volume cm³: | 2035 | Injection pressure increased bar: | 1821 |
Size and weight
Dimension HxWxD m: | 10 x 2.3 x 2.3 | Total weight Kg: | 27900 |
|---|
Additional information
Euromap12
3 x Kernzüge
| Netstal | Injection Moulding Machine | |
| Type: HP 3000/1650 | Control: - | Year: 1995 |
Clamping unit
Clamping force t: | 300 | Opening stroke mm: | 625 |
|---|---|---|---|
Distance between tie bars mm: | 680 x 680 | Installation height min/max mm: | 500-850 |
Mould fixing platen size h x v: | 1040 x 1040 |
Injection unit
Screw size mm: | 70 | Injection shot weight in Polysterol gr: | 868 |
|---|---|---|---|
Injection volume cm³: | 954 | Injection pressure increased bar: | 1727 |
Size and weight
Dimension HxWxD m: | 9 x 2.30 x 2.52 | Total weight Kg: | 21.500 |
|---|
Additional information
Euromap 12
| Netstal | Injection Moulding Machine | |
| Type: HP 3000/1650 | Control: - | Year: 1996 |
Clamping unit
Clamping force t: | 300 | Opening stroke mm: | 625 |
|---|---|---|---|
Distance between tie bars mm: | 680 x 680 | Installation height min/max mm: | 500-850 |
Mould fixing platen size h x v: | 1040 x 1040 |
Injection unit
Screw size mm: | 70 | Injection shot weight in Polysterol gr: | 868 |
|---|---|---|---|
Injection volume cm³: | 954 | Injection pressure increased bar: | 1727 |
Size and weight
Dimension HxWxD m: | 9 x 2.30 x 2.52 | Total weight Kg: | 21.500 |
|---|
Additional information
Euromap 12
| Netstal | Injection Moulding Machine | |
| Type: Synergy S3000-1700/900 2 Component, 30.000 Runhour | Control: - | Year: 2001 |
Clamping unit
Clamping force t: | 300 | Opening stroke mm: | 0-700 |
|---|---|---|---|
Distance between tie bars mm: | 720 x 720 | Installation height min/max mm: | 400-750 |
Mould fixing platen size h x v: | 1127 x 1060 |
Injection unit
Screw size mm: | 70/50 | Injection shot weight in Polysterol gr: | 916/377 |
|---|---|---|---|
Injection volume cm³: | 954/393 | Injection pressure increased bar: | 1801/1840 |
Size and weight
Dimension HxWxD m: | 8.8 x 2.3 x 2.3 | Total weight Kg: | 23.300/1.500 |
|---|
Additional information
Neureder Roboter
Drehtisch mit Servomotor
Magnetplatte auf der Düsenseite
Kaskadesteuerung
2 Kernzüge
Robot schnittstelle
Gasinjection System
| Stork | Injection Moulding Machine | |
| Type: SX 5500-8600 | Control: CDS 500 | Year: 1998 |
Clamping unit
Clamping force t: | 550 | Opening stroke mm: | 850 |
|---|---|---|---|
Distance between tie bars mm: | 830 x 830 | Installation height min/max mm: | 300 / 850 |
Mould fixing platen size h x v: | 1290 x 1320 |
Injection unit
Screw size mm: | 98 | Injection shot weight in Polysterol gr: | 3690 |
|---|---|---|---|
Injection volume cm³: | 3885 | Injection pressure increased bar: | 2100 |
Size and weight
Dimension HxWxD m: | 10,5 x 2,2 x 2,4 | Total weight Kg: | (18,2+11,7) 29000 |
|---|
Additional information
Euromap 12
Accu
| Vecoplan | Injection Moulding Machine | |
| Type: VAZ 160/200 SLF | Control: SPS Steuerung | Year: 2004 |
Size and weight
Dimension HxWxD m: | 3.5 x 3.75 x 2.34 | Total weight Kg: | 19.000 |
|---|
Additional information
Einlauflänge: 1600 mm
Einlaufbreite: 2000 mm
Rotordurchmesser: 640 mm
Doppelte Anzahl Schneidkronen 48 Stück
(80 x 80 mm)
Rotordrehzahl: 148 UpM
Sieblochdurchmesser: 120 mm
Antriebsleistung: 250 kW
Betriebsspannung: 400 V
Frequenz: 50 Hz
Durchsatz : bei gesichtetem, vorzerkleinertem und FE-befreites Material
zur Ersatzbrennstoffafubereitung
> 12 t/h bei Schwergut mit einer Dichte von 120 kg/m³
> 5 t/h bei Leichtgut mit einer Dichte von 80 kg/m³
bei Produktkorngröße < 150 mm mehr als 98%
< 30 mm weniger als 5%.
| Battenfeld | Blow moulding machine | |
| Type: Fischerkopf Kopf | Control: - | Year: |
Additional information
3 fach T Battenfeld Fischerkopf Kopf
Stichabstand : 100 mm
Düse : 40
Anschluß : 90 Spannflansch
| Fischer-W.Müller | Blow moulding machine | |
| Type: Müllerkopf S3 - 55/120 | Control: - | Year: |
Additional information
3 x Müllerkopf in Reihe S3 - 55/120
Stichabstand : 120 mm
Düse : max. 55 mm
Anschlußstück: 60 mm
| Fischer-W.Müller | Blow moulding machine | |
| Type: FMB 4/12-100 , 3 layer Coex Blow machine Complete Line | Control: Moog TMC | Year: 1998 |
Injection unit
Screw size mm: | 50/90/50 |
|---|
Size and weight
Dimension HxWxD m: | 7.4 x 7.7 x 2.4 | Total weight Kg: | 14.300 /5.000/11.000 |
|---|
Additional information
Data Sheet: FISCHER FMB used 4/12/100
3 layer Coex Blow machine Complete Line
Year: 1998
Location: Mülheim / storage
Brand: FISHER W.Müller
Model: FMB 4/12/100
Land: For Sale
Availability: Immediate
Technical Details
Containers with the current configuration: 1 l
Number of heads: 12
Material: PE
Number of stations: 2
Extruder type: Continuous
Number of extruders: 3
2 x 2.0-50mm Unex
Unex 1x 6.0 -90 mm
Screw diameter: 120 mm
Engine power: 22 Kw
90 Kw
L / D: 24 and 28
Technical Details
Cycle - 12.6 sec = output / day = 70,000 botles
The head included.
For more information
Availability: Immediate
| Magic | Blow moulding machine | |
| Type: MG 5D | Control: - | Year: 1991 |
Additional information
Capacity 5 ltrs
Heads 2
E/C 180 mm, Layers 3
Station 2, Moog Control: Yes
PLC:Gefram
Cutting:Gold
| Müller | Extrusion Machine | |
| Type: ELK 60-28, Profil Extruder | Control: - | Year: 1995 |
Injection unit
Screw size mm: | 60 |
|---|
Additional information
ELK 60-28D
57 KW
| Engel | Auxiliary equipment | |
| Type: ERC 53/1 - CL, Roboter | Control: - | Year: 1999 |
Additional information
X-Achse Entformhub 650 mm Y-Achse Vertikalhub 1.300 mm Z-Achse Quertransport 2.600 mm ***** Grundgerät ***** X-Achse Entformhub Max. Verfahrweg 650 mm Antrieb Servomotor Y-Achse Vertikalhub Max. Verfahrweg 1.300 mm Antrieb Servomotor Z-Achse Quertransport Max. Verfahrweg 2.600 mm Antrieb Servomotor C-Achse Schwenken 0 - 90° Antrieb pneumatisch Manipulationsgewicht 10 kg ***** Pneumatik ***** Luftwartungseinheit mit Handschiebeventil Saugerkreise mit Unterdrucküberwachung 1 Greiferkreis mit Teileüberwachung 1 ***** Elektrik ***** Handlingsteuerschrank freistehend Die Spritzgießmaschine benötigt eine ERC-Schnittselle Standardspannung 3x400V+N+PE / 50 Hz Peripherieschnittstelle Standard ***** Allgemein ***** Mikrocomputer RC 100 integriert Bildschirmtext deutsch Handbediengerät HBG 2, zwei zeiliges Display Lackierung chromgelb RAL 1007 Hard- und Software für TEACH IN Sicherheitspaket 1 Aufbau der Vorrichtung mit Ständer auf FAP Zusatz Schaltschrank - Abmessungen 580 x 500 x 1880 mm Zustand : grundüberholt Techn. Daten : gemäß beiliegendem Datenblatt Die Roboter-Steuerung RC100 ist als integrierte Steuerung mit der Maschinensteuerung ausgeführt. Beide Steuerungen müssen daher kompatibel sein Ein eingehende Prüfung ist erforderlich Zubehör Transport - Abmessungen L x B x H 2.750 x 1.400 x 2600 mm Transportgewicht 300 + 190 kg
| Thimonnier | Auxiliary equipment | |
| Type: Z 83 BS 100, Hochfrequenz-Kunststoff-Schweißpresse | Control: - | Year: 2001 |